FASTENINGS COMPONENTS

Anchors and studs are used for securely binding or anchoring components to a permanent base. You can use both types of fasteners in a broad range of applications from building construction to automotive engine assemblies. While studs and anchors are different devices, they typically serve the same purpose.

Studs are vertical or horizontal protrusions where pre-drilled parts are slipped over them and then secured by a threaded complementary fastener. Studs are classified as "male" components. They are threaded on the exposed side end and designed to hold fast, allowing a female open-ended compression fastener like a nut to secure the work.

Usually, a nut and washer combination is screwed over the stud to hold a component securely to a base. Studs are typically set into the main structural component's subsurface and attached by bonding or by expanding compression like set concrete.

ANCHOR AND STUD APPLICATIONS

Studs are common in mechanical assemblies, such as engine cylinder heads. The studs just press into the metal and hold down moving parts like rocker arms.

Anchors also secure components to a fixed base, although they function more like receptacles. You can screw or set other fasteners into them. Anchors are similar to tapped holes. They are designed as female receptacles that accept male companions like threaded bolts or machine screws. Anchors work best in solid applications where your workers can set them in predrilled holes in concrete. You can also use anchors in hollow wall situations like interior drywall partitions.

FASTENINGS COMPONENTS TYPES

Standard nails are classified as anchors, and so are mechanical rivets used in fastening aircraft and marine parts. Another common fastener type is the anchor bolts used in building foundations. These are a combination of an anchor and a stud. Do you know what type of anchor and stud you need for your project? Check out our comprehensive inventory list, or contact us if you're unsure. Our inventory of anchors and studs includes:

• Anchors
• Bolts
• Hardware products
• Hooks
• Keystocks
• Straps
• Measuring tools
• Nails
• Nuts
• Pins
• Retaining ring
• Rivets
• Screws
• Wedges and sockets
• Stapples
• Thread inserts
• Washers
• Threaded rod
• Nylon fasteners
• Hose clamp
• Cables / ropes / Strings / Spits
• Chains
• Tensioner
• Cable clamp
• Handle

BRANDS and suppliers

Trusted high quality brands are available at Groupe J.S.V. Inc. like Cobra, Powers, Hilti, Onward, Stanley, Spae-Naur, Duchesne, Tec-n-tec, Paulin, Ben-mor , Vanguard.

YOU CAN TRUST groupe J.S.V. Inc. FOR ALL YOUR NEEDS of accessories

At Groupe J.S.V. Inc., our mission is to make sure our customers feel fully satisfied and valued. We do everything in our power to provide you an excellent service and we do everything possible to exceed your expectations. You can trust us for all your fastener needs.

Please visit our easy-to-use and secure website. You will find more than just a huge volume of regular and speciality fasteners. We also carry hand and power tools from name brands like Bosch, DeWalt, Fein, Makita, Milwaukee, Ridgid and Walter and a large supply of safety equipment.

If you need something not listed online, we will do our best to source it for you. Contact us online.